Door Knob Commercial Keypad Door Lock Door Lock Home Depot Magnetic Door Locks Commercial Entry Home
Most Popular This Week
A door knob is a hardware handle which is installed in a cabinet door with the use of a screw or sometimes a bolt. Compared with finger pulls and door latches this is a better option because it is more versatile easier to install and to use. Any color either light or dark door knobs will definitely fit any style of door. Knobs have different ranges in terms of its size. It ranges from 1 inch to 1 ½ inch diameter which is appropriate in almost all sizes of the doors except for the big ones. Aside from round shapes knobs are also available in shapes like flat but the edges are round square or bun shape and even shaped like T. It can be made of metal or wood and it can just be plain or with decorations.
Moreover the constant touch of sweaty or wet hands on these door knobs can make them look drab. Antique glass door knobs are durable and are prone to different weather conditions. Glass knobs add a flair to the door and make them look aesthetically beautiful. The only way you can get yourself one of these valuable beauties is by constantly keeping a check in antique shops or glass shops that stock vintage products. Since antique glass knobs are in demand there could be instances where individuals end up buying a replica thinking its an antique.
Most Popular This Week
You need to secure the latch into the edge of the door with the screws provided. Point the curved side of the latch toward the direction the door closes as this is very important. If the latch is put on backwards it will not close. Its now time to line up the mounting plate these are the circles that will be fit on both sides with the latch mechanism. Usually there is two screw holes that attach the mounting plates to the door. Screw and tighten the screws making sure that the mounting plates are flush against the door. Some door knobs require you to do this on both sides while others require only a single side. You may also need to insert two long screws to hold it all together. Do a final check to ensure that the mounting plate circles completely cover the hole before tightening the screws down.